Technical control bodies

bt_bb_section_bottom_section_coverage_image

Technical control bodies

The technical control body of “NAREK” scientific research CJS Company carries out TECHNICAL SAFETY TESTING OF HAZARDOUS PRODUCTION FACILITIES according to the requirements of the GOST ISO/IEC 17020-2013 standard in the following areas:
1) elevators, if they are installed in public structures, including industrial buildings, multi-apartment buildings, and other places intended for general use, except for elevators with a load capacity of 250 kg and less;
2) productions or separate sites, factories, production areas, warehouses, installations, technological equipment or any other object where harmful substances characterized by the following characteristics are produced, processed, stored, transported, used or received in quantities exceeding the limits established by the Government of the Republic of Armenia:
a. Flammable substances that become flammable when mixed with air in the gaseous state at normal pressure and with a boiling point at normal pressure of 200C or less,,
b. oxidizing agents that support combustion, initiate fire or contribute to the ignition of other substances as a result of redox exothermic reactions,
c. combustible substances: liquids, gases, dusts, which have self-igniting properties and can also ignite from a fire source,
d. explosive substances which may explode when exposed to flame or show greater sensitivity to shock and contact than dinitrobenzene,
e. toxic substances that can cause disease or death by affecting living organisms,
f. substances posing a threat to the natural environment, which acquire acute toxic properties in the aquatic environment;
3) productions or separate sites, factories, production areas, warehouses, installations, technological equipment or any other object where equipment operating at pressures of 0.07 megapascals or more is used, thermal facilities working at a temperature of water up to 1150 C (60 kW of power and more) and above 1150 C.
4) productions or separate sites, factories, production areas, warehouses, installations, technological equipment or any other object where mining, drilling or work in the direction of mineral enrichment is carried out;
5) productions or separate sites, factories, production areas, warehouses, installations, technological equipment or any other object where tunnel construction or any other underground work is carried out;
6) productions or separate sites, factories, production areas, warehouses, installations, technological equipment or any other object where metal melts are made;
7) escalators, cableways, funiculars, carousels, lifting cranes, lifting equipment and mechanisms with a load capacity of one ton or more;
8) petroleum products, liquefied gas, compressed natural gas, fixed and mobile filling stations, gas cylinder equipment, facilities using gas for technological purposes, gas storages.


Payment for work on conformity assessment is made on a contractual basis.

We are connected with youFill out an application